Radyne DM240XR Spécifications télécharger pdf (Page 172)

DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup

MN-DM240XR– Revision 13 B–6

To verify that connectivity and settings are correct, use the Ping command to report if the Host

(Equipment) is correctly responding. This is accomplished by opening the MS-DOS Command

Prompt and executing a Ping command as shown in the following example.

1. Open MS-DOS Command Prompt. The Screen will display:

Microsoft Windows XP [Version 5.1.2600]

2. At the Command Prompt Enter “ping 172.18.100.215” (Enter the IP Address of the equipment

to be tested). The screen will display:

Microsoft Windows XP [Version 5.1.2600]

C:\> ping 172.18.100.215

3. If the ping is successful the screen will display:

C:\>ping 172.18.100.215

Pinging 172.18.100.215 with 32 bytes of data:

Reply from 172.18.100.215: bytes=32 time=109ms TTL=64

Reply from 172.18.100.215: bytes=32 time<1ms TTL=64

Reply from 172.18.100.215: bytes=32 time=2ms TTL=64

Reply from 172.18.100.215: bytes=32 time=123ms TTL=64

Ping statistics for 172.18.100.215:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 123ms, Average = 58ms

4. If the ping is unsuccessful the screen will display:

C:\>ping 172.18.100.215

Pinging 172.18.100.215 with 32 bytes of data:

Request timed out.

Ping statistics for 172.18.100.215:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Check the following items that may lead to the unsuccessful response:

a. Verify that the correct cables are connected to the Ethernet port and that they are

secured.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 195 196

Pas de commentaire

Radyne DM240XR Spécifications Page 172