Radyne QAM256 Instructions d'exploitation Page 72
- Page / 87
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
QAM256 Digital Video Modulator and Upconverter Remote Operations
TM077 – Rev. 4.0 C-17
(0 = mask, 1 = allow)
Opcode: <204Fh> Query a modulator's PRBS (test pattern)
Query response:
<1> PRBS (0 = Normal, 1 = PRBS23, 2 = PRBS23M, 3 = PRBS15, 4 =
PRBS15M)
Opcode: <2051h> Query a modulator's Base Band Loopback
Query response:
<1> BB Loopback (0 = Normal, 1 = Loopback)
Opcode: <2053h> Query a modulator's output power level
Query response:
<4> Tx Power Without cable Upconverter, value is in dBm.
(Signed value. +00 to -250 (+0.0 to -25.0 dBm)
(Implied decimal point)
Ex: +0.0dbm, data returned = 00 00 00 00 = 00 decimal =
+0.0dbm
Ex: -25.0dbm, data returned = FF FF FF 06 = 100000000 –
FFFFFF06 = FAh = 250 = -25.0 dBm
With cable Upconverter, value is in dBv.
(Signed value. +450 to +600 (+45.0 to +60.0 dBv)
(Implied decimal point)
Opcode: <2054h> Query a modulator's carrier control
Query response:
<1> TX Enable (0=Off, 1=On)
Opcode: <2055h> Query a modulator's carrier test
Query response:
<1> TX Carrier (0=Normal, 1=CW)
Opcode: <2060h> Query a modulator's channel table
Query response:
<1> Channel Table (0 = EIA STD, 1 = EIA HRC, 2 =EIA IRC, 3 = Trad STD, 4 = Trad
HRC, 5 = Trad IRC)
Opcode: <2061h> Query a modulator's channel
Query response:
<1> Channel (See channel entry tables at end of protocol)
Modulator Command Opcodes
Opcode: <2240h> Command a modulator's frequency
<4> Frequency (Binary value, 1 Hz steps)
(Without cable Upconverter the range = 43 MHz to 44 MHz, or
Optional 35 MHz to 37 MHz)
(With cable Upconverter the range = 50 MHz to 862 MHz)
(This command will cause the carrier to turn off)
Opcode: <2241h> Command a modulator's data rate
<4> Data rate (Binary value, 1bps steps)
(This command will cause the carrier to turn off)
Opcode: <2242h> Command a modulator's symbol rate
- Digital Video Modulator 1
- Warranty Policy 2
- Preface 4
- Table of Contents 6
- TM077 – Rev. 4.0 ix 8
- Introduction 10
- 1-2 TM077 - Rev. 4.0 11
- Installation 12
- 2.2 Removal and Assembly 13
- 2.3 Mounting Considerations 13
- TM077 – Rev. 4.0 2-3 14
- Theory of Operation 15
- 3-2 TM077 - Rev. 4.0 16
- User Interfaces 17
- 4.1.3 Numeric Keypad 18
- 4.2 Parameter Setup 19
- 4.3.1 Main Menus 20
- TM077 – Rev. 4.0 4-5 21
- 4-6 TM077 - Rev. 4.0 22
- TM077 – Rev. 4.0 4-7 23
- 4.5 Connecting the Terminal 24
- 4.6 Terminal Screens 24
- Main Menu Screen: 25
- 4-10 TM077 - Rev. 4.0 26
- TM077 – Rev. 4.0 4-11 27
- 4-12 TM077 - Rev. 4.0 28
- TM077 – Rev. 4.0 4-13 29
- 4-14 TM077 - Rev. 4.0 30
- TM077 – Rev. 4.0 4-15 31
- 4-16 TM077 - Rev. 4.0 32
- Rear Panel Interfaces 33
- 5.3 TX MON Port 34
- 5.4 TX IF Port 34
- TM077 – Rev. 4.0 5-3 35
- 5.5.1 TX PARALLEL Connector 36
- 5.5.2 REMOTE Connector 36
- 5.5.3 TX ASI Connector 36
- 5.8 Optional DVB Interface 37
- 5-6 TM077 - Rev. 4.0 38
- TM077 – Rev. 4.0 5-7 39
- 6.0 Periodic Maintenance 40
- 6-2 TM077 - Rev. 4.0 41
- Technical Specifications 42
- 7.2.1 RF Interface 43
- 7.2.2 Baseband Interface 43
- 7.2.3 Remote Interface 43
- 7.2.4 Physical 43
- TM077 – Rev. 4.0 7-3 44
- Product Options 45
- A-2 TM077 - Rev. 4.0 46
- SNMP MIB 47
- B-2 TM077 – Rev. 4.0 48
- TM077 – Rev. 4.0 B-3 49
- B-4 TM077 – Rev. 4.0 50
- TM077 – Rev. 4.0 B-5 51
- B-6 TM077 – Rev. 4.0 52
- TM077 – Rev. 4.0 B-7 53
- B-8 TM077 – Rev. 4.0 54
- TM077 – Rev. 4.0 B-9 55
- Remote Operations 56
- C.1.2 Protocol Wrapper 57
- TM077 – Rev. 4.0 C-3 58
- 02h = 00000010b 58
- C-4 TM077 – Rev. 4.0 59
- RESPONSE OPCODE DESCRIPTION 59
- Invalid Control Mode 59
- C.1.5 Collision Avoidance 60
- C.1.6 Software Compatibility 61
- C.1.8 RLLP Summary 62
- C-8 TM077 – Rev. 4.0 63
- TM077 – Rev. 4.0 C-9 64
- C-10 TM077 – Rev. 4.0 65
- TM077 – Rev. 4.0 C-11 66
- C-12 TM077 – Rev. 4.0 67
- TM077 – Rev. 4.0 C-13 68
- C-14 TM077 – Rev. 4.0 69
- TM077 – Rev. 4.0 C-15 70
- C-16 TM077 – Rev. 4.0 71
- TM077 – Rev. 4.0 C-17 72
- C-18 TM077 – Rev. 4.0 73
- TM077 – Rev. 4.0 C-19 74
- C-20 TM077 – Rev. 4.0 75
- TM077 – Rev. 4.0 C-21 76
- C-22 TM077 – Rev. 4.0 77
- TM077 – Rev. 4.0 C-23 78
- C-24 TM077 – Rev. 4.0 79
- TM077 – Rev. 4.0 C-25 80
- C-26 TM077 – Rev. 4.0 81
- Glossary 82
- G-2 TM077 – Rev. 4.0 83
- TM077 – Rev. 4.0 84
- G-4 TM077 – Rev. 4.0 85
- G-6 TM077 – Rev. 4.0 87
Produits connexes et manuels pour Modulateur Radyne QAM256
Modulateur Radyne DM240XR Spécifications
(196 pages)
(196 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.457 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels